What's in your vise?

Buzzy

I prefer to call them strike indicators.
Forum Supporter
Black-Delta-with-Big-Ass-1080.jpg


Black Delta with Big Ass

Atlantic salmon, rainbow and brown trout, whitefish, bass and even pike

Pierre Tremblay Originator

Hook - Mustad 79580, 9672 or equivalent, size 10
Thread - Black

Body - Pre shaped black foam spider body

Wings - Gray squirrel tail hair

Head - Orange chenille



Pre shaped foam bodies

Foam-bodies.jpg
Interesting pattern, Norm, thanks! Did you glue the foam body to the hook shank?
 

Norm Frechette

Googlemeister
Forum Supporter
Interesting pattern, Norm, thanks! Did you glue the foam body to the hook shank?





1. Wrap the thread around the hook shank, from front to back, up to the point of the hook. The wide, pointed part of the foam body (the “big ass”) should extend beyond the bend of the hook by about 1/4 inch in length; also leave a gap of about 1/4 inch in length at the front of the rubber, to form the head there later.

2. Before attaching the foam body, make an incision under its front part, without penetrating more than half of its thickness. Later, you will put a few drops of glue on it to prevent the foam body from rotating around the hook shank.

3. Place the base of the foam body on the hook shank, pinch it to hold it in place and tie it to the tip of the hook point with several very tight turns of thread. You have just formed the "waist", in front of the "big ass". Then lift the front part of the rubber to wrap the thread forward; take the opportunity to deposit the glue in the incision already made. Then fold the front end of the rubber over the hook shank and tie it securely to its end with several tight turns of thread. You have thus formed the "thorax" in front of the "waist".

4. The two wings are each formed from a pinch of gray squirrel tail hair. The wings must not be longer than the rubber and must be attached to each side of it, forming a 45-degree angle laterally with the hook shank. Apply glue to the attachment point of the wings and cut off the excess hair. Form the head with two or three wraps of a piece of orange chenille. Place a few drops of glue on the hook shank to prevent it from slipping. Finish everything with finishing knots and varnish.
 

FinLuver

Native Oregonian…1846




1. Wrap the thread around the hook shank, from front to back, up to the point of the hook. The wide, pointed part of the foam body (the “big ass”) should extend beyond the bend of the hook by about 1/4 inch in length; also leave a gap of about 1/4 inch in length at the front of the rubber, to form the head there later.

2. Before attaching the foam body, make an incision under its front part, without penetrating more than half of its thickness. Later, you will put a few drops of glue on it to prevent the foam body from rotating around the hook shank.

3. Place the base of the foam body on the hook shank, pinch it to hold it in place and tie it to the tip of the hook point with several very tight turns of thread. You have just formed the "waist", in front of the "big ass". Then lift the front part of the rubber to wrap the thread forward; take the opportunity to deposit the glue in the incision already made. Then fold the front end of the rubber over the hook shank and tie it securely to its end with several tight turns of thread. You have thus formed the "thorax" in front of the "waist".

4. The two wings are each formed from a pinch of gray squirrel tail hair. The wings must not be longer than the rubber and must be attached to each side of it, forming a 45-degree angle laterally with the hook shank. Apply glue to the attachment point of the wings and cut off the excess hair. Form the head with two or three wraps of a piece of orange chenille. Place a few drops of glue on the hook shank to prevent it from slipping. Finish everything with finishing knots and varnish.
Where do you get the foam bodies from?
 

Divad

Whitefish
Black-Delta-with-Big-Ass-1080.jpg


Black Delta with Big Ass

Atlantic salmon, rainbow and brown trout, whitefish, bass and even pike

Pierre Tremblay Originator

Hook - Mustad 79580, 9672 or equivalent, size 10
Thread - Black

Body - Pre shaped black foam spider body

Wings - Gray squirrel tail hair

Head - Orange chenille



Pre shaped foam bodies

Foam-bodies.jpg
Norm I was surprised by the deviation from materials on this one, the name only more suiting. Neat fly, it’s like a hot headed beetle.
 

TicTokCroc

Sunkist and Sudafed
Black-Delta-with-Big-Ass-1080.jpg


Black Delta with Big Ass

Atlantic salmon, rainbow and brown trout, whitefish, bass and even pike

Pierre Tremblay Originator

Hook - Mustad 79580, 9672 or equivalent, size 10
Thread - Black

Body - Pre shaped black foam spider body

Wings - Gray squirrel tail hair

Head - Orange chenille



Pre shaped foam bodies

Foam-bodies.jpg

That was a fun Google image search... 😄

Was looking for some history on the fly, what book it's in etc. But there's nothing out there.
 

wanderingrichard

Life of the Party
Saguay-1080.jpg

La Saguay (The Saguay)

Philippe Desfossés Originator

Bass Fly

Hook - Hook - Gamakatsu T10-6H or equivalent

Thread - Black

Tag – Oval silver tinsel

Tip – Fluorescent green and burnt orange floss or uni stretch

Tail – Red floss

Butt – Black ostrich herl

Ribbing – Oval silver tinsel

Body – Fluorescent burnt orange and green floss or uni stretch

Wing - A few chartreuse green bucktail hairs, under a few orange-dyed bucktail hairs, under a few chartreuse green deer tail hairs, under some chartreuse-green Krystal Flash fibers.

Collar - Chartreuse green hen hackle

Head - Black with red ring in its center

It was in 1990 that Desfossés invented the "Saguay", a streamer for fishing bass. "I wanted to create a fly using a lot of fluorescent materials: I believe that bass are attracted to what is very visible. I named this streamer "Saguay" in honor of Saguay Lafond, the son of a cousin living in Shawinigan." "Saguay" is an Indian word meaning: "the beginning of a river". This streamer, Philippe Desfossés usually throws it into the rapids and lets it drift, before bringing it back by jerks when it passes near the rocks, where the bass are on the lookout for prey.
I like the fact that its the old stand by "nuclear chicken" in a fly pattern. wonder how well it works ?
 

Norm Frechette

Googlemeister
Forum Supporter
That was a fun Google image search... 😄

Was looking for some history on the fly, what book it's in etc. But there's nothing out there.

youll have to google translate

 

Norm Frechette

Googlemeister
Forum Supporter
Saracen-1080.jpg

Saracen

André Thibodeau

Brook Trout

Hook - Mustad 9672 or equivalent, size 12

Thread - Black

Tail - red hen hackle fibers

Body - Beige, cream, ecru wool

Ribbing - Oval gold tinsel

Wing - Mallard flank

Throat - Red hen hackle fibers
 

Norm Frechette

Googlemeister
Forum Supporter
La-et-Voila-1080.jpg

Et Voilà

(There you go or there we are)

Bernard Parisien Creator

REAR

Hook - Mustad 3906B or equivalent, size 6
Thread - Red
Ribbing - Oval silver tinsel
Body - Flat blue tinsel and red thread coated with uv resin at each end of the body.

The hooks are connected by an .024-inch diameter nylon-coated steel wire

FRONT

Hook - Mustad 9672 or equivalent, size 2
Thread – Black
Ribbing – Oval silver tinsel
Body - Flat blue tinsel
Belly - Silver or pearl krystal flash under white bucktail
Wing – Blue krystal flash over blue bucktail
Topping – Peacock herl
Eyes – Painted black over whi
 

Billy

Big poppa
Staff member
Admin
La-et-Voila-1080.jpg

Et Voilà

(There you go or there we are)

Bernard Parisien Creator

REAR

Hook - Mustad 3906B or equivalent, size 6
Thread - Red
Ribbing - Oval silver tinsel
Body - Flat blue tinsel and red thread coated with uv resin at each end of the body.

The hooks are connected by an .024-inch diameter nylon-coated steel wire

FRONT

Hook - Mustad 9672 or equivalent, size 2
Thread – Black
Ribbing – Oval silver tinsel
Body - Flat blue tinsel
Belly - Silver or pearl krystal flash under white bucktail
Wing – Blue krystal flash over blue bucktail
Topping – Peacock herl
Eyes – Painted black over whi
Nice. I sure love the look of those old school bucktail flies!
 

ABITNF

Steelhead
Some mayflies on a Tiemco 200R #16. Tail is a brown stripped hackle stem touched with a brown felt pen. Body is bleached and dyed brown peacock counter-ribbed with xs olive UTC wire. Thorax is olive dyed Wapsi squirrel dubbing with a wingcase in matte black cut from a chip bag.IMG_20220710_140915977_HDR_copy_828x682.jpg
 

_WW_

Geriatric Skagit Swinger
Forum Supporter
View attachment 22187
Summer Run Pocket Rocks

All weighted with 3.8 or 4.6 tung, lead eyes, and skinny bodies. These little rocks plummet hook up, with still enough sex appeal to move a fish a slot or two.

All on U555 hooks, so far the only I trust barbless nymphing big fish. They’re the crème de la crème, a mustache to a Frenchman, the don mega.
Do you wear a helmet when you cast them?
 

Kfish

Flyologist
Forum Supporter
View attachment 22187
Summer Run Pocket Rocks

All weighted with 3.8 or 4.6 tung, lead eyes, and skinny bodies. These little rocks plummet hook up, with still enough sex appeal to move a fish a slot or two.

All on U555 hooks, so far the only I trust barbless nymphing big fish. They’re the crème de la crème, a mustache to a Frenchman, the don mega.
What species do you fish these for?
 

Norm Frechette

Googlemeister
Forum Supporter
LA-GRAND-DUC-SP-CIALE-Grand-Duke-Special-1080.jpg



La Grand Duc Spéciale (Grand Duke Special)

Claude Bedard

Rear

Hook - Mustad 3906B, sizes 6

Thread - Black

Tail – Red hen hackle

Ribbing – Oval silver tinsel

Body – Orange floss

The hooks are connected by an .024-inch diameter nylon-coated steel wire

Front

Hook - Mustad 79580, size 6

Thread - Black

Ribbing – Oval silver tinsel

Body – Orange floss

Throat - Red hen hackle fibers

Wing – Lavender bucktail over purple krystal flash over white bucktail

Topping - Peacock herl

Cheeks – Jungle Cock
 
Top