Saturday in the scablands

My kid lives in Spokane and I've always wanted to try Sprague lake since we've driven past it a bunch of times. The plan was for him to meet me at 9:30 Saturday morning at Sprague public launch and we would give it a try.
Knowing the wind is always a factor at Sprague, I had backup plans that included Fishtrap, Amber and even making him drive further from Spokane like Coffeepot.

I decided to truck camp Friday night on some BLM land and it was close to Fishtrap so I got the boat out for a couple scouting hours before finding my camp spot.
Only fish was a pretty, yet ugly hatchery fish of just over 16". Got him stripping a type 3 on my go-to prospector fly, a black & green bugger with white bead-head along the cliff.
20220603_190428_2.jpg

For not having a full prop he fought very well.

I found a "spot" at Hog Lake BLM and slept pretty well considering the trains went by every few hours and it rained ALL night. I was nice and dry in my camper shell.
20220603_204925_HDR_2.jpg

The forecast was showing rain at Sprague until 11 so I told my son to take his time and 10 was plenty early. By the time he got to the launch at 10, the forecast was now showing rain until 1pm. The wind was manageable, but coupled with the constant spray it was not looking like an enjoyable time. The Odessa and Harrington forecast was showing rain until 11 so we made the easy audible and headed for Coffeepot.

We got to Coffeepot by 11 and setup the boat to bobber fish in the lower shallow end, but there was so much crude in the water and only panfish messing with my balanced leech that we decided to cut through the gap and troll a bit. The scablands are more green than I've ever seen. It looked more like Scotland than Lincoln county. I got a fish on a dry line troll just past the gap to get the skunk off.
Had a little drama with my kid letting my type 3 6wt line into the prop of the 25HP Merc when netting my fish. Somehow, someway, I pulled the kill switch just in time. The line was wrapped about 8 times, but did not break it. Barely scratched it. It's probably my least favorite line to cast, but one of the fishiest I've ever had. I was relieved it is still fishable.

We went ashore and had a nice Frech bread, meat and cheese lunch. The Charolais cows that came down to water made lunch even more French. :LOL:

After lunch we trolled up the lake to try more bobber fishing at a couple tables, but just never got it dialed. I saw a few gigantic olive mids come off and get hit on top. Only thing I had even close were some #12 Green Drakes in the river box. No go.

We had fun checking out the geology and the life that can spring seemingly out of pure rock.
20220604_162705.jpg

We trolled, drifted dries, drift & stripped sunken flies and casted both dries and sunken flies to the shore. No go.

We finally found fish in 2 spots trolling the type 3 and type 6 so just trolled in a circle to eventually pick up a few fish each. It was a nice way to cap a great day with my kid. We felt like we made the right call on a tough day. Here's his last fish of the day.
20220604_180631_HDR_2.jpg

A lot of driving (not cheap with gas $$ right now), but a great day.
 
Yep, good stuff and also thanks for the pics of your rig. Now I know what a transom saver is and I want one. There are many options; anything to recommend?
 
Yep, good stuff and also thanks for the pics of your rig. Now I know what a transom saver is and I want one. There are many options; anything to recommend?
I can't imagine not having a transom saver on the old Valco. Especially since it has the 25 Merc on it. But even if I just had a 9.9 I would still want one. Why put the transom thru hell when bouncing along the terrible freeways or gravel washboard roads that we go on.

I have this very affordable Atwood that Amazon carries and really like it.
 
Do you think you can still put in a bigger boat in coffee pot? Maybe a 18 foot bass boat with 115 hp? Asking for a friend😊
 
Do you think you can still put in a bigger boat in coffee pot? Maybe a 18 foot bass boat with 115 hp? Asking for a friend😊
Haha, tell that friend no problem. ;)
The shallow end is plenty deep and once you get to the bigger, upper part it's like 60 feet deep all the way across. It's like a big box full of water. The only challenge would be the actual launch. Loose gravel and fairly steep. I made sure I was in 4HI just so I didn't spray gravel.

And LOTS of gunk in the water at the launch. We spent a fair amount of time trying to get it off, but I90 in the rain probably got more of it off than us. I'll definitely be checking it before I put it back in somewhere.
 
Great report and trip! That Valco must fly with a 25! I had one with an old 18 hp Evinrude and it scooted.
It's fast enough. A GPS boat speedo app thingy on my phone said I got her up to 23 mph. That was on a flat calm day on Hood Canal. That is fast enough for me in a 14' riveted aluminum boat, especially in the cold or rain. Or for this spring...cold AND rain.
After trolling for a few hours we let her rip to clean out the Merc. Fun may have factored just as much as outboard care in that decision. ;)
 
Back
Top