Redington Reel Seat Screws

Scottybs

Scottybs

Head Master Flyfisher In Charge
Forum Supporter
Anyone know where to source some reel seat screws for a 3/4 Drift? M3 .5 pitch x 6 mm length, the flat Phillips heads are pretty small. Tried the local hardware store, no luck and Amazon, heads were too big. Waiting to hear back from Farbank, but not holding my breath.

Thanks,

Scott
 
McMaster-Carr is another option: https://www.mcmaster.com/

www.mcmaster.com

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
www.mcmaster.com www.mcmaster.com
 
For what it’s worth. I found if you send Redington a photo. Of the reel. They are pretty good on responding …
 
Scottybs said:
Anyone know where to source some reel seat screws for a 3/4 Drift? M3 .5 pitch x 6 mm length, the flat Phillips heads are pretty small. Tried the local hardware store, no luck and Amazon, heads were too big. Waiting to hear back from Farbank, but not holding my breath.

Thanks,

Scott
Click to expand...
Scott, did you find a source for the screws???
 
509 said:
Scott, did you find a source for the screws???
Click to expand...

I went to Tacoma Screw the other day and no luck. After some internet searching I stumbled upon Belmetric.com having a screw that is very close, I should have remeasured instead of relying on the TS measurements and gone with 6mm length, but 5mm has enough grab and hopefully threadlock helps.
IMG_3004.jpegIMG_3003.jpeg
 
You must log in or register to reply here.
Back
Top