That's a Wrap ...

Canuck from Kansas

Aimlessly wondering through life
Forum Supporter
How do you do your wraps? Do you use one of those new-fangled machines or wrap by hand. Me, I use a bobbin and wrap by hand.

1) Exactly 3 wraps of Pearsall's Gossamer Highland Green in front of the foot, then up the foot:

1651444900403.jpeg


2) Tipped with exactly 3 turns Pearsall's Gold and exactly 3 turns Pearsall's Scarlet:

1651444966833.jpeg


I keep the tags of the tipping wraps until after a couple of coats varnish:

1651445001405.jpeg


Topside

1651445034445.jpeg


3) Then antique amber oil, cure 1 hour, another coat amber oil, 1 hour cure, followed by Sutherland Welles spar varnish cut with turpentine (.9/.1) and warmed in a hot water bath. Cure at least 72 hours, then up to 4 additional coats Sutherland Welles spar varnish, at least 72 hours between each coat (essentially the way Russ at Golden Witch describes). Results in a nice translucent, old-school look - the gold tipping "melts" into the cane:

Oiled wrap:

1651445120751.jpeg

After first coat varnish:

1651445216684.jpeg

Cheers
 
Nice wraps, please put up some photos after the final steps are completed. Antique amber oil for the first coat on your wraps is a new process to me, I'll need to look it up for more information.


7'6", 3 piece; great for packing into the backcountry and high elevation/high gradient streams.

The oil is to wet the threads, helps prevent microbubbles. Cutting the fist coat of varnish and heating also helps penetration and allows for a very thin coat. I don't have a dip tank, don't think I would even want to use one, varnish coats look too thick.


Different silk, but same process (lighting is a little shiny):

1651451479709.jpeg
 
Nice work, Canuck. Real nice!
 
Back
Top