Removing Marks on Aluminum Boat Hull

[MELinOre]

I secured my boat travel cover with a bungee cord that has left marks on the hull exterior. I tried using degreaser and it didn't do anything. The marks are from the plastic exterior of the bungee hook.

The boat hull has a valuable "machine turning" pattern on the exterior that I don't want ruined.

What are the suggestions for cleaning up that ugly mark?

 

[CRO]

if you have wd40 give it a try.

 

[Tom Butler]

Looks like a job I'd try a Mr. Clean Magic Eraser on.

 

[SurfnFish]

Looks like a job I'd try a Mr. Clean Magic Eraser on.

x2...works on pretty much everything, including making old cork handles look fresh again...the Dollar Store a cheap source for same

 

[MELinOre]

Here are the results using suggested material and a couple I came up with that I already had.
1) WD-40
2) Carb Cleaner
3) Mr Clean Magic Eraser
4) Turtle Wax Rubbing Compound
5) Nu-Finish Scratch Doctor

The Turtle Wax Rubbing Compound did the best job of removing the black streaks with the cloth picking up a lot of black material.
The remaining 4 items were about equal in effectiveness.

I think I will continue multiple cleanings with the Turtle Wax and when I am satisfied will touch up the area with a circular fine grit sanding disc to restore the machine turned area that has been degraded by the rubbing compound.

Thank you to all that provided input!

 

[FinLuver]

Citrus Air Freshener Spray
Removes glue residue
Loosens stickers
Gentle on most paints (that I have tried it on)
Smells good too