Most Buoyant Floating Line ?

Wetswinger

Beneath the surface of the mud, there’s more mud.
Forum Supporter
I’ve been working hard trying to hone my “naked line” technique, in the local ponds this year. With this technique the line itself is the strike indicator. Hence a strong, high floating line, especially the tip, is a plus. Some articles claim that some nymph rig river lines are designed to work this way. Others claim the materials in Airflo are superior to pvc lines. What would you all recommend for the best bombproof floater? As a side note: ease of casting is not a big deal as 40 foot cast are all that’s needed…
 
  • Like
Reactions: Zak
I made a set-up that worked well when giving Euro-nymphing whirl, and wanted an alternative to the typical Euro set-up. Picked up a WF from STS on sale, cut the tip back about four feet, applied a 2" section of red heat shrink tubing about 3" back from the tip, finished the tip off with a GuideBrod micro loop.
Worked fine, the takes were easily spotted with the red shrink tubing acting as the sighter. Only issue was having to guide the tip landing so it didn't splash too hard.
 
Here’s another perspective on naked line technique. I’m not suggesting you do anything differently than what you’re already doing but I like Phil’s ideas on many stillwater fishing topics.
 
Would the shrink tube add any extra flotation?
no, just there for a sight indicator on takes.
Key to high flotation is a line routinely cleaned and treated...I clean/treat a line by pulling it through a damp cloth to remove dirt, let it dry, and then pull it through another cloth sprayed liberally with 303 Aerospace Protectant...like having a new line each time.
 
I insert the leader butt into the flyline's core and use a knotless connection with zap-a-gap to attach the leader to the line. I have found the tip floats much better than loops or nail/needle knots consistently floating high all the way to the tip. My theory is the flyline's tip is sealed by the zap-a-gap connection which prevents water from wicking into the core and reducing the line's bouyancy.

I don't know that my theory is correct but all lines I've connected leaders this way have never had a tip that sinks. Of course you still need to keep your line clean. My favorite floatant is the impregnated felt pads that Cortland used to include with their lines.

The connection is easy to make, never hangs in a guide and is strong enough for steelhead.
 
Back
Top