NFR Metal supplier?

[Scudley Do Right]

I'm building a skate ramp for my son out of the old shed. I need a 4' stick of rigid pipe and something like 4'x1' 3/16" steel. Does anyone know of any suppliers in the area that sell off cuts where I might be able to find something. So far all I have into is it is 4 clearance casters and a couple of handles from ace. Not trying to spend too much on it.

 

[Paige]

Everett Steel, they'll have what you need.

 

[Stonedfish]

If you find yourself down south, these folks might have what you need.
SF

Seattle Steel - State-Certified Metal Supplier

Looking for a supplier of small or large quantities of steel, aluminum, and steel? Contact Metal Shorts for a metal supplier in Seattle, WA.

www.metalshorts.com

 

[BFC]

Alaskan Copper and Brass Company.
They have several locations.

 

[Merle]

For knife-making and other DIY projects, I've bought a lot of steel from Online Metals:

https://www.onlinemetals.com/?gad_source=1&gad_campaignid=6502026653&gclid=EAIaIQobChMIhIzn_afWkAMVxR-tBh3SYwLcEAAYASAAEgIPGPD_BwE

You can sort by size, shape, alloy etc... they usually have what I need, (but I just did a quick search for your pipe and the closest I could find is 1.0" dia carbon steel). The down side is you have to pay shipping.

Is this to go at the top of the ramp where it transitions from the flat landing to the slope?

 

[Scudley Do Right]

For knife-making and other DIY projects, I've bought a lot of steel from Online Metals:

https://www.onlinemetals.com/?gad_source=1&gad_campaignid=6502026653&gclid=EAIaIQobChMIhIzn_afWkAMVxR-tBh3SYwLcEAAYASAAEgIPGPD_BwE

You can sort by size, shape, alloy etc... they usually have what I need, (but I just did a quick search for your pipe and the closest I could find is 1.0" dia carbon steel). The down side is you have to pay shipping.

Is this to go at the top of the ramp where it transitions from the flat landing to the slope?

Yeah pipe at the top and flat steel at the bottom. I have ordered smaller stuff before but would rather find local so I don't have to ship. I thought of a lead on some after posting. If it doesn't work I'll check one of the places listed this week.

 

[CRO]

Yeah pipe at the top and flat steel at the bottom. I have ordered smaller stuff before but would rather find local so I don't have to ship. I thought of a lead on some after posting. If it doesn't work I'll check one of the places listed this week.

i have a 7ft piece of 1.32 OD x 1.02 ID steel pipe that you can have if you will pick up

 

[Scudley Do Right]

i have a 7ft piece of 1.32 OD x 1.02 ID steel pipe that you can have if you will pick up

Thank you for the offer. The person I was thinking of was able to sang what I needed.

 

[Scudley Do Right]

Here's what I ended up with. Left the top masonite outside and started to rain see if it's salvageable tomorrow. Also find a way to temporarily attach the transition. That way it will roll on end in the garage.