Hi there,
This was salvaged off an old 15' drift boat that is headed for boat heaven shortly. Sadly, this boat didn't get much use.
It was owned by a buddy that became disabled shortly after he got it about 25 years ago. It's been sitting in his back yard ever since. The boat probably has less than 20 trips on it. I have only known him for a couple years otherwise it would have many more hours on it.
The parts are aluminum so still in great shape. Here's the parts list and what Dierks sells them for these days.
1- Dierks Anchor Release with Top Mount Pulley- AR1TP2 Current retail is $120.50
2- Dierks Top Mount Pulley- TP2 Current retail is $32 per so $64 total.
1- Clamcleat Major- CL205 Current retail is $17
Total of $201
There's also an aluminum back plate for mounting the anchor release that Dierks must include with it as I don't see a separate part on their website.
EDIT- Oar locks are gone.
Also some brass oar locks. Not sure what brand, but they are heavy duty. Here's the measurements-
5/8" shaft
1 5/8" opening
2 1/2" oar diameter
7 3/4" overall length
3 1/2" bumper to pin hole
3 1/2" tall
I would love to get $70 total for my buddy. I've brushed the dirt off with a bristle broom. All the wheels work great.
I've taken 150 grit, just briefly, to the boat sides of the aluminum to remove the rust stains left by crappy washers.
There's some stainless screws and a few nuts that are in great shape as well.
I can separate the oar locks if you want. I would say $20 for those if we go that route.
Again, would love to be able to give him $70. He's on the steep downhill side of life. He & his wife can always use a few bucks.
I can meet or deliver in Kent/Covington/Maple Valley/Black Diamond/Ravensdale. I don't think anyone would save much if we need to ship. If you really need them shipped I can check for shipping charges.
If nobody grabs them here I'll list it on FB Marketplace for $100. I'll be putting the galvanized Livingston drift boat trailer on here as well so look soon for that.
Thanks,
Stacy
This was salvaged off an old 15' drift boat that is headed for boat heaven shortly. Sadly, this boat didn't get much use.
It was owned by a buddy that became disabled shortly after he got it about 25 years ago. It's been sitting in his back yard ever since. The boat probably has less than 20 trips on it. I have only known him for a couple years otherwise it would have many more hours on it.
The parts are aluminum so still in great shape. Here's the parts list and what Dierks sells them for these days.
1- Dierks Anchor Release with Top Mount Pulley- AR1TP2 Current retail is $120.50
2- Dierks Top Mount Pulley- TP2 Current retail is $32 per so $64 total.
1- Clamcleat Major- CL205 Current retail is $17
Total of $201
There's also an aluminum back plate for mounting the anchor release that Dierks must include with it as I don't see a separate part on their website.
EDIT- Oar locks are gone.
Also some brass oar locks. Not sure what brand, but they are heavy duty. Here's the measurements-
5/8" shaft
1 5/8" opening
2 1/2" oar diameter
7 3/4" overall length
3 1/2" bumper to pin hole
3 1/2" tall
I would love to get $70 total for my buddy. I've brushed the dirt off with a bristle broom. All the wheels work great.
I've taken 150 grit, just briefly, to the boat sides of the aluminum to remove the rust stains left by crappy washers.
There's some stainless screws and a few nuts that are in great shape as well.
I can separate the oar locks if you want. I would say $20 for those if we go that route.
Again, would love to be able to give him $70. He's on the steep downhill side of life. He & his wife can always use a few bucks.
I can meet or deliver in Kent/Covington/Maple Valley/Black Diamond/Ravensdale. I don't think anyone would save much if we need to ship. If you really need them shipped I can check for shipping charges.
If nobody grabs them here I'll list it on FB Marketplace for $100. I'll be putting the galvanized Livingston drift boat trailer on here as well so look soon for that.
Thanks,
Stacy
Last edited:
