anchor line management (small pram)

jonboy

Just Hatched
Hello, I picked up a small 8ft fishing pram recently. I have bow and Stern anchors. Each anchor has 50 feet of line. How do people manage their anchor lines in the boat? Right now, each line is flaked into a rubbermaid bin about the size of a large shoebox and is then fed through the lock and pulley. Is there a better option? Thanks!
 
Hello, I picked up a small 8ft fishing pram recently. I have bow and Stern anchors. Each anchor has 50 feet of line. How do people manage their anchor lines in the boat? Right now, each line is flaked into a rubbermaid bin about the size of a large shoebox and is then fed through the lock and pulley. Is there a better option? Thanks!
I use the "Rubbermaid" bins for anchor line management in my pram. When I'm done for the day, I pop our the Scotty pulleys and put them with the anchor into the bin, stow them in the bed of my truck. I do, from time to time, inspect the knots to the anchor for wear. I find it's helpful to pull all the line out of the bin and place it back into the bin from the tag end sort of layering it back which seems to almost eliminate tangles when lower the anchor.
 
50’…..that’s a lot of line for most lakes. I have a 25’ bow line and a 20’ stern line. But I anchor in fairly shallow areas just to indicator fish. Being an old carpenter, I coil my line like an extension cord.
 
installed small bright rope float on my stern anchor line.
Paid off after netting a strong fish only to realize the stern anchor had dislodged from the jam cleat and was now a hundred yards upwind.
 
Last edited:
I used those plastic extensions cord wraps to hold anchor line.

The newer Scotty mounts with the release button and positive engagement make the Scotty anchor system much more secure.

Nowadays I fish from a Hobie kayak and never use an anchor to hold a position, even on windy days. Between rudder control and forward/reverse drive it's effortless to hold position and orientation.

I don't miss dealing with anchors, especially in weedy lakes where pulling anchor may result in harvesting a heavy load of lake salad.
 
Last edited:
I used an Anchor Wizard with the line routed through a Scotty anchor system on the stern of the kayak with the line retention ratchet removed. The Scotty basically became a mounted pulley for the anchor line.

The Wizard worked well but if you used it to really control watercraft orientation you'd need another duplicate system...which would be a pricey solution.

That said, an Anchor Wizard does eliminate the anchor line storage issue.

I should mention that anchors on a kayak can be dangerous in wind if the anchor mounting point is on the 'wrong' side (downwind side with the anchor line running under the hull) because it can easily roll the kayak over. Stern or bow mounting eliminates that problem.
 
Last edited:
Back
Top