Search results

OK Steve, you've reached a new high (or low) 🤣 🤣 🤣 🤣 🤣 That is the ugliest rod I've seen in my life.......But you did wash your truck for the picture (y)

For an intermediate I like, RIO Products Fly Line Mainstream Aqualux Intermediate Wf5I, Clear For my floating lines, I like the 406 lines out of Montana For my full sink line; I like RIO MAINSTREAM WF-5-S6 TYPE 6 FULL SINK SINKING All these lines are thin in diameter, have minimum to no...

Good luck Robert, hope you are on the water soon after Thanksgiving after beating the cancer.

🤣 🤣 🤣 🤣 🤣 🤣

:unsure: 🤣;)👎

Recently I found a rod and reel combination on the Tree Farm Property north of Snoqualmie. If you are the owner who lost this, message me the place, brand and details of the combination. Mike

Recently I found a rod and reel combination on the Tree Farm Property north of Snoqualmie. If you are the owner who lost this, message me the place, brand and details of the combination. Mike

Well, I have to agree that was one ugly stick Steve. Looking forward to seeing you do some magic on that poor thing.

Here is a guide spacing guide you can use. I agree with Steve, I'd remove all the guides and start with the chart's spacing. https://snakeguides.com/pages/guide-spacing Mike

Sure I could use a set, Shi[pping to 98052 would be not a problem.

I have to say that I believe the fuel cans will be listed as hazardous, you might have a hard time shipping those.

I like the 406 lines because they feel thinner than most other lines I have. The lines feel like there is less wind resistance because of the thinner diameter and carry the cast farther because of it. I think they feel as close to a silk line as you can get with a plastic line. If you are...

It's surprising how different lines from different manufactures will cast on a bamboo fly rod (I like 406 Fly Lines myself, no financial interest). Looks like you will have a nice balance with your Thompson 100 choice you have mounted. To easily sample many different lines just leave the...

Wow Dave, great day for you! Great pictures too as always.

Such a great time! Great to see old friends and make some new friends.

Sorry to hear that you can't make the fling Dave. Hope to see you next time or on another occasion.

Sorry to hear that Greg.

Yes it is

Put me down to cast Ray's RR166, I don't remember casting it last year if you brought it. That being said I don't remember a lot of things now in my older years, must be the signs of the misspent years of my youth🤣

My taper is similar in the stress graphs to Ray Gould's RR166 and his RR171. My first attempt to design a similar taper at 7'10" in a 5wt turned out to be happy with a 6 or 7wt line instead. I met Ray for lunch one day in Bothell and he cast the first try and cast the new taper after lunch at...