Redington Fly Reel parts

chrome/22

Low Profile Operator
Forum Supporter
Was working on an older Redington CD 5/6 size reel

Was reversing the one way clutch bearing & the retaining clip took off on me. Anyone know if that clip is a common part across their newer reels?
 
I found some spare clips at an auto parts shop, and at a hardware store, for a Redington Run 5/6.
You’ll find them called external snap rings, C-clips, or E-clips. Size 3/16” fit the Run. I’m not sure if 3/16” is the diameter of the axle, or of the axle groove where the clip fits into. Hope this helps, partner.
 
I found some spare clips at an auto parts shop, and at a hardware store, for a Redington Run 5/6.
You’ll find them called external snap rings, C-clips, or E-clips. Size 3/16” fit the Run. I’m not sure if 3/16” is the diameter of the axle, or of the axle groove where the clip fits into. Hope this helps, partner.
Awesome response, FarBank would leave him hanging
 
Mine are this type

Free and installed over 1 way bearing



IMG_20261118_160626898_HDR.jpgIMG_20261118_160926034_HDR.jpg
 
Last edited:
I did a Google Lens search, and came up with a possible match for that retainer clip (circlip). It found a schematic parts page for the Redington CDL, but not the CD, showing part number 17, “one-way retainer”. Maybe a local fly shop has one in a box of misc. stuff, or contact Far Bank; they might have one to send you.
 
Yes found the same information. Have a number of the CDL reels as well
 
2 thoughts:

1) These are commonly called "jeezuz clips" as in "jeezuz where did that go."
2) Perform such tasks that might result in flying clips/springs/detent balls/etc inside of a clear plastic bag large enough to accomodate your hands & the item being disassembled/reassembled. Things can still fly but are typically captured in the bag.
 
Back
Top